Residential Demand Recirculation System | 150 Series | Under Sink Kit | 3-Speed Pump | DR150A-USK
$1,619.58
For use on recirculation loops over 400 lineal feet.
- Residential AutoHot Demand Recirculation System eliminates the wait for hot water in any home or light commercial plumbing system, saving thousands of gallons of water per year.
- Operates only on demand, when needed.
- Reduces pump run time over 90 percent, the most efficient hot water recirculation system available today.
- Meets the most current energy code requirements for recirculation pump demand controls including I.E.C.C and California Title 24.
- Includes wired and wireless activation switches
Recommended Installation
- For use on standard plumbing.
- The AutoHot Residential Demand Controller 150-Series Pump is best suited for larger homes, or when you have a hot water system with approximately more than 250 lineal feet of pipe between the water heater and farthest fixture.
- Multiple activation methods available, including: wired and wireless manual push button switches and wired and wireless motion sensors.
- Works with any tank, tankless or heat pump water heater.
- The AutoHot Residential Demand Controller DR150A-USK includes the 150-Series Pump and Under Sink Kit for use on any standard plumbing system that does not have a return line.
- Ability to pair up to ten wireless activators, buttons, motion sensors or both so you can activate the system from anywhere in your house.
Features and Usage
- For use on system(s) without a dedicated recirculation loop.
- Works with tank, tankless or heat pump water heaters.
- Proudly designed and manufactured by AutoHot.
The Advantages & Benefits of Using AutoHot
- Can be used on any standard plumbing system with any type of tank, tankless, or heat pump water heater.
- Eliminates the wait for hot water providing comfort and convenience.
- Running faucets and showers waiting to get hot water can easily waste as much as 30 gallons of water daily. Save on average 3,000 to 11,000 gallons of water annually.
- The AutoHot residential on demand controller uses the on-demand activation and temperature sensors to turn the pump on and off.
- AutoHot demand recirculation will maintain the performance and efficiency of any heat pump water heater.
- Costs less than $5.00 per year in energy to operate.
Installation Guidelines
- For use on standard plumbing.
- Install underneath the kitchen or bathroom sink furthest away from the water heater. Includes the entire installation kit and assemblies.
USK Guidelines
- You do not have a dedicated return line.
- You are retrofitting a home without a circulator pump.
- You are installing at the end of a “dead-leg” branch line or riser (farthest fixture from the water heater).
Entire Kit (USK) Includes
- (2) 18″ Flex Lines
- (2) Custom Brass Tee Fittings
- (2) Pump Flanges
Recommended Accessories
Wireless Motion Sensors
Wireless Buttons
Recirculation Pump Mounting Bracket
For Distributor Pricing Please Reach Out.
AutoHot Residential Brochure
1 file(s) 10 MB
AutoHot Residential Installation and Operations Manual
1 file(s) 2 MB
Weight | 22 lbs |
---|---|
Dimensions | 22 × 17 × 12 in |